عامل الاستاتيكيه الدائم المصنع من الصين

عامل دائم مضاد للرطوبة ومضاد للكهرباء الساكنة 1.207 جم/سم3 للمكونات الإلكترونية

Permanent Antistatic Agent for Polymers ASTPEEN 806 ASTPEEN 806 features low surface resistance and easy color matching. This white/pale yellow elastomer particle product offers surface resistance ≤10⁶ Ω, hardness 50D, and melting point ~200℃. Product Overview Recommended for PC, ABS, PBT, PET, TPEE and other materials with high processing temperature and surface hardness requirements Suitable for extrusion (sheets, plates), injection molding, molding and other processes
العامل الصناعي الدائم المضاد للستاتيكية الحبيبات صناعة القالبات بالحقن

Permanent Antistatic Agent for Polymers ASTPEEN 800 Features low surface resistance and easy colour matching. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Product Specifications Test Item Unit Test Method Test Value Tensile Strength at 25℃ MPa GB/T 528 7.3 Elongation at Break at 25℃ % GB/T 528 1322 Shore Hardness, 3s HD GB/T 2411 25 Density g/cm³ GB/T 533 1.241 Melt Flow Rate (200℃, 2.16kg) g/10min GB- 3682
بوليمر التحكم الثابت الدائم عامل مضاد للكهرباء الساكنة درجة الحقن للصناعة

Permanent Antistatic Agent For Polymers ASTPEEN 8800 Series White elastomer pellets with surface resistance ≤ 10¹⁰ Ω, hardness 95A, and melting point ~180°C. Recommended for transparent materials including GPPS (8801), ABS (8802), PMMA (8805), PC/PET (8808), PP/PE (8818) and other transparent grades. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other applications. Recommended Dosage Direct addition to material at 10-25%
الكتل البيضاء العامل المضاد للستاتيك للطحن / صناعة الحقن / صناعة النفخ

Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If necessary, add an appropriate amount (3–5%) of compatibilizers such as EAA, EEA, POE and corresponding maleic anhydride grafted polymers. It is mandatory to perform pre-blending
عامل مضاد للكهرباء الساكنة دائم مخصص حبيبات صناعية للإلكترونيات الحساسة

Permanent Antistatic Agent For Polymers Astpeen 313 This product is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Recommended Dosage It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used. Instructions for Use Blend ASTPEEN permanent polymeric antistatic agent
ASTPEEN 813 حبيبات العامل المقاوم للولايات الدائمة للقالبات البلاستيكية

Permanent Antistatic Agent For Polymers Astpeen 813 This permanent antistatic agent features low surface resistance and easy color matching. It is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Recommended Dosage It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of
عوامل مضادة للكهرباء الساكنة مخصصة للتحكم في الكهرباء الساكنة، مواد كيميائية عالية الكفاءة للاستخدام الصناعي

Permanent Antistatic Agent for Polymers ASTPEEN 600 White/pale yellow elastomer particles featuring low surface resistance and easy color matching. Surface resistance ≤10⁶ Ω, hardness ~95A, melting point ~200°C. Recommended Applications Recommended for modification of HIPS, ABS, TPEE, PC, PBT, PP and other materials, as well as injection molding and extrusion of sheets (pelletizing required). Product Specifications Test Item Unit Test Method Test Value Tensile Strength at 25℃
جزيئات عامل مضاد للكهرباء الساكنة مقاوم للحرارة بدرجة غذائية للمنتجات البوليمرية

ASTPEEN 310 Permanent Antistatic Agent for Polymers Pale yellow translucent elastomer particles designed for effective static control in polymer applications. Features low surface resistance and easy color matching capabilities. Key Specifications Surface Resistance: ≤ 1*10⁶ Ω Hardness: 95A Melting Point: ~180℃ Appearance: Pale yellow translucent elastomer particles Technical Properties Test Item Unit Test Method Test Value Tensile Strength at 25℃ MPa GB/T 528 6.8 Elongation

1 2 التالي