Permanent Static Control Polymer Antistatic Agent Injection Grade For Industrial
Productdetails
| Kleur: | Wit | Toepassingsbereik: | Industrieel antistatisch middel |
|---|---|---|---|
| Fysieke eigendom: | Niet-migrerend antistatisch additief | Productvorm: | Geleidende polymeer masterbatch |
| Markeren |
Permanent Static Control Antistatic Agent,Static Control Polymer Antistatic Agent,Industrial Polymer Antistatic Agent |
||
Productbeschrijving
- Thoroughly blend ASTPEEN permanent polymeric antistatic agent with base resin by dry mixing
- Add dispersants, fillers, pigments, etc., as required
- Melt and compound using twin-screw extruder to process into masterbatch
- Special masterbatch available (can be directly used after uniform dry mixing with raw materials at 1:1, 1:2 or 1:3 ratio)
- Compatible with conventional processing methods: open mixing/internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming
- Suitable compatibiliser may be added as required (consult for specific products)
- Pre-drying recommended before processing: 85-125℃ for 2-4 hours to prevent performance loss
- Use product as soon as possible after opening
- Store unused product in sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage and residual materials must be dried at 85-125℃ for 2-4 hours before use
- Moisture absorption may result in degraded performance during processing
- Packaging: 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag
- Storage: Cool, dry, ventilated warehouse away from direct sunlight, heat sources and ignition sources
- All raw materials are polymeric compounds with eco-friendly production process
- No waste gas, waste water or industrial residue generated
- Non-toxic granular solid
- General protective equipment recommended (gloves, dust masks) during handling
- In case of accidental contact with eyes or skin: rinse immediately with plenty of water and seek medical attention if discomfort occurs
Producthoogtepunten
Permanent Antistatic Agent For Polymers ASTPEEN 8800 Series White elastomer pellets with surface resistance ≤ 10¹⁰ Ω, hardness 95A, and melting point ~180°C. Recommended for transparent materials including GPPS (8801), ABS (8802), PMMA (8805), PC/PET (8808), PP/PE (8818) and other transparent grades...
25D Thermoplastic Polyurethane Elastomer Granule TPEE Plascic Raw Material
Thermoplastic Polyurethane Elastomer TPEE 25D Product Overview TPEE 25D offers high impact resistance, stable performance, and easy processing capabilities. This thermoplastic polyurethane elastomer requires proper pre-drying before processing to maintain optimal material properties. Technical Specifications Test Items Test Method 25D Tensile Strength, 25℃, MPa GB/T 528 5.5 Elongation at Break, 25℃, % GB/T 528 410 Shore Hardness, 3s, HD GB/T 2411 25 Density, g/cm³ GB/T 533 1
Industrial Grade Thermoplastic Polyurethane TPU Elastomer Granule 72D Shore Hardness
Thermoplastic Polyurethane Elastomer TPEE 72D Product Overview TPEE 72D offers high impact resistance, stable performance, and easy processing capabilities, making it ideal for demanding industrial applications. Technical Specifications Test Items Test Method 72D Tensile Strength, 25℃, MPa GB/T 528 38.5 Elongation at Break, 25℃, % GB/T 528 475 Shore Hardness, 3s, HD GB/T 2411 72 Density, g/cm³ GB/T 533 1.290 Processing Requirements Pre-drying is essential: TPEE must be pre
50D Hardness Thermoplastic Polyurethane Elastomer Industrial Use Automotive Grade
Thermoplastic Polyurethane Elastomer TPEE 50D TPEE 50D offers high impact resistance, stable performance, and easy processing capabilities. This thermoplastic polyurethane elastomer requires proper pre-drying before processing to ensure optimal performance. Technical Specifications Test Items TPEE 50D Shore Hardness, 3s, HD 51 Tensile Strength, 25℃, MPa 19.2 Elongation at Break, 25℃, % 587 Melt Flow Rate, g/10min (220℃, 2.16kg) 1.0/6.9 Density, g/cm³ 1.175 Processing
Thixotropic Water Stop Paste Waterblocking Compound For Optical Cables
Waterblocking Compound For Optical Fiber Cable Water blocking grease for optical and electrical cables is a thixotropic paste-form chemical water-blocking material specially designed for optical cables, communication cables and power cables. It is compounded through an advanced process. Its core function is to expand rapidly upon contact with water when the outer sheath of a cable is damaged and water intrudes, forming a gel-like barrier that effectively prevents further
Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.
