Polymer Permanent Antistatic Agent 100D Low Melting Point For Industrial Injection Moulding
Product Details
| Product Color: | White/Pale Yellow | Process Method: | Internal Antistatic Additive |
|---|---|---|---|
| Product Form: | Polymer Antistatic Masterbatch | Performance Feature: | High-Conductivity Plastic Additive |
| Highlight |
Polymer Permanent Antistatic Agent for Injection Moulding,Low Melting Point Antistatic Agent,Industrial Permanent Antistatic Agent 100D |
||
Product Description
| Surface Resistance | ≤ 10⁶ Ω |
| Hardness | 60 A |
| Melting Range | 85°C |
| Appearance | White/pale yellow elastic granule or powder |
- Permanent and highly effective: Anti-static properties do not diminish over time, through surface wiping or solvent cleaning
- Toughening modification: Can be used independently as an elastomer to enhance impact resistance
- Stable performance: Withstands demanding processing temperatures and environmental factors
- Minimal impact on mechanical properties: Negligible effect on strength, heat resistance and flowability
- Good compatibility: Excellent compatibility, not prone to leaching
- Easy color matching: Fully meets color requirements
- Excellent transparency: Minimal impact on base resin transparency
- Blend ASTPEEN with base resin thoroughly by dry mixing
- Add dispersants, fillers, pigments as required
- Melt and compound using twin-screw extruder to process into masterbatch
- Special masterbatch available for direct use after uniform dry mixing
- Compatible with conventional processing methods: open mixing, extrusion, injection moulding, etc.
- Pre-drying recommended: 85-125℃ for 2-4 hours to prevent performance loss
- Use product as soon as possible after opening
- Store unused product in sealed container to prevent moisture absorption
- Materials with vacuum bag leakage or residual materials must be dried at 85-125℃ for 2-4 hours before use
Storage: Store in cool, dry, ventilated warehouse away from direct sunlight, heat sources and ignition sources
Product Highlights
ASTPEEN 100D permanent antistatic agent offers permanent conductivity (≤10⁶ Ω), low melting point (85°C), and toughening modification. Compatible with EPDM, NBR, silicone rubber, EVA and TPE, it maintains mechanical properties and transparency while resisting environmental factors.
White PS Anti Static Masterbatch Conductive Pellet High Temp Resistant For Injection
PS Based Permanent Antistatic Masterbatch Conductive Pellet PS antistatic masterbatch uses polystyrene as carrier, combined with high-temperature resistant permanent antistatic active substance. Specially optimized for PS injection and foaming products, it offers excellent fluidity and dispersion ...
White Granules Antistatic Agent For Extrusion / Injection Molding / Blow Molding
Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If ...
Permanent Polymer Antistatic Agent ASTPEEN108 Plastic Pellets For Industrial Use Highly Effective
Permanent polymer antistatic agent ASTPEEN108 offers long-lasting performance with low resistance. White granules suitable for LDPE, HDPE, and PP processing. Features easy coloring capability and works with extrusion, injection molding, and blow molding applications.
General-purpose Anti-static Masterbatch PP Plastic Pellets – Permanently High-performance Supplied Directly From The Factory
Permanent anti-static PP masterbatch forms internal conductive network for durable static protection, independent of humidity. Simplifies production with direct mixing, no blooming, and stable 10⁶–10¹¹ Ohm resistance for injection, extrusion, and packaging applications.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
