Quality Permanent Polymer Antistatic Agent ASTPEEN313 Plastic Pellets For Industrial Use Injection Moulding And Blow Moulding Permanent Highly Effective factory

Permanent Polymer Antistatic Agent ASTPEEN313 Plastic Pellets For Industrial Use Injection Moulding And Blow Moulding Permanent Highly Effective

Brand Name: HAISO ASTPEEN

Model Number: 313

Place of Origin: Hubei,China

Industrial Grade Antistatic Agent

Halogen Free Anti Static Agents

Anti Aging Antistatic Agent Granules

Product Details

Product Color:	White/Pale Yellow	Core Category:	Permanent Antistatic Agent
Process Method:	Internal Antistatic Additive	Performance Feature:	Low Surface Resistance Masterbatch
Physical Property:	Colourable Antistatic Polymer
Highlight	Permanent antistatic polymer pellets , Antistatic agent for injection moulding , Industrial polymer pellets for blow moulding

Product Description

Permanent Polymer Antistatic Agent ASTPEEN313 Plastic Pellets

This product is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.

Product Features

Permanent and highly effective: Anti-static properties do not diminish over time, through surface wiping or solvent cleaning, and remain effective throughout the product's lifecycle.
Toughening modification: Can be used independently as an elastomer to enhance the impact resistance (toughness) of the base material.
Stable performance: Withstands demanding processing temperatures and methods, and is virtually unaffected by external environmental factors (temperature, humidity and wear).
Minimal Impact on Mechanical Properties: Has a negligible effect on the mechanical strength, heat resistance and processing flowability of the host material.
Good Compatibility: Exhibits excellent compatibility, is not prone to leaching, and does not affect subsequent printing, spraying or bonding processes.
Easy Colour Matching: Fully meets colour matching requirements.
Excellent transparency: The addition of the corresponding antistatic agent has a minimal impact on the transparency of the base resin, making it particularly suitable for applications where high transparency is required.

Recommended Dosage

It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.

Instructions for Use

Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing. Add dispersants, fillers, pigments, etc., to the mixture as required, then melt and compound using a twin-screw extruder to process into masterbatch.

If needed, we can provide special masterbatch, which can be directly used in production after uniform dry mixing with raw materials at a ratio of 1:1, 1:2 or 1:3.

Any conventional processing methods can be applied, such as open mixing / internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.

A suitable compatibiliser may be added as required (please consult us for specific products).

Before processing, pre-drying of the mixture is recommended as needed (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss during processing.

Precautions

Use up the product as soon as possible after opening. Any unused product must be stored in a sealed container to prevent moisture absorption.

Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use. Otherwise, moisture absorption from air may result in degraded performance during subsequent processing.

Packaging and Storage

Packaging	25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag
Storage	Store in a cool, dry and ventilated warehouse, away from direct sunlight, heat sources and ignition sources

Safety and Environmental Protection

All raw materials are polymeric compounds with an eco-friendly production process and no waste gas, waste water or industrial residue.

This product is non-toxic granular solid. General protective equipment (e.g. gloves, dust masks) is recommended during handling.

In case of accidental contact with eyes or skin, rinse immediately with plenty of water. Seek medical attention promptly if discomfort occurs.

Product Highlights

Permanent Polymer Antistatic Agent ASTPEEN313 offers permanent, highly effective static protection that withstands cleaning and wear. It enhances impact resistance with minimal effect on mechanical properties, heat resistance, or transparency. Features excellent compatibility, easy color matching, and stable performance under various processing conditions.

Send Inquiry

Long Lasting Permanent Antistatic Additives White Granules For Transparent ABS

ASTPEEN 8802# Permanent Antistatic Agent for Transparent ABS ASTPEEN 8802# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent ABS materials. This polyether ester amide (PEBA) based polymer antistatic agent is designed to solve static problems in ...

28-72D Hardness TPEE Antistatic Material Halogen Free Anti Static Additives For Plastic

Halogen-free TPEE antistatic material combines elasticity with stable static dissipation. Excellent tensile strength, elongation, and processability for safe, efficient production in sensitive applications.

Antifouling Antistatic Additives Cylindrical Particles For Transparent PP And PE

ASTPEEN 8818# Permanent Antistatic Agent for Transparent PP & PE ASTPEEN 8818# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent PP (including random copolymer polypropylene) and PE materials. As a polyether ester amide (PEBA) based polymer ...

White Granules Antistatic Agent For Extrusion / Injection Molding / Blow Molding

Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If ...

Request A Quote

Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.

Email*

Phone / WhatsApp

Name

Company Name

Inquiry Message*

Attach Files

Choose Files

You can upload up to 5 files and Each file sized 10M max.