Permanent Polymer Antistatic Agent ASTPEEN813 Plastic Pellets For Industrial Use Injection Moulding And Blow Moulding Permanent Highly Effective
Product Details
| Core Category:: | Permanent Antistatic Agent | Application Scope:: | Antistatic Agent For Polymers |
|---|---|---|---|
| Performance Feature:: | Low Surface Resistance Additive | Value-added Feature: | Easy Colour Matching Antistatic |
| Highlight |
Permanent antistatic polymer pellets,Antistatic agent for injection moulding,Polymer pellets for blow moulding |
||
Product Description
- Permanent and highly effective: Anti-static properties do not diminish over time, through surface wiping or solvent cleaning, and remain effective throughout the product's lifecycle.
- Toughening modification: Can be used independently as an elastomer to enhance the impact resistance (toughness) of the base material.
- Stable performance: Withstands demanding processing temperatures and methods, and is virtually unaffected by external environmental factors (temperature, humidity and wear).
- Minimal Impact on Mechanical Properties: Has a negligible effect on the mechanical strength, heat resistance and processing flowability of the host material.
- Good Compatibility: Exhibits excellent compatibility, is not prone to leaching, and does not affect subsequent printing, spraying or bonding processes.
- Easy Colour Matching: Fully meets colour matching (colour) requirements.
- Excellent transparency: The addition of the corresponding antistatic agent has a minimal impact on the transparency of the base resin, making it particularly suitable for applications where high transparency is required.
Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing. Add dispersants, fillers, pigments, etc., to the mixture as required, then melt and compound using a twin-screw extruder to process into masterbatch.
Any conventional processing methods can be applied, such as open mixing / internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
A suitable compatibiliser may be added as required (please consult us for specific products).
Use up the product as soon as possible after opening. Any unused product must be stored in a sealed container to prevent moisture absorption.
Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use. Otherwise, moisture absorption from air may result in degraded performance during subsequent processing.
| Packaging | 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag. |
|---|---|
| Storage | Store in a cool, dry and ventilated warehouse, away from direct sunlight, heat sources and ignition sources. |
All raw materials are polymeric compounds with an eco-friendly production process and no waste gas, waste water or industrial residue.
This product is non-toxic granular solid. General protective equipment (e.g. gloves, dust masks) is recommended during handling.
In case of accidental contact with eyes or skin, rinse immediately with plenty of water. Seek medical attention promptly if discomfort occurs.
Product Highlights
Permanent polymer antistatic agent for industrial plastic modification. Features permanent effectiveness, stable performance, minimal impact on mechanical properties, excellent compatibility, and transparency. Suitable for injection and blow moulding.
White PS Anti Static Masterbatch Conductive Pellet High Temp Resistant For Injection
PS Based Permanent Antistatic Masterbatch Conductive Pellet PS antistatic masterbatch uses polystyrene as carrier, combined with high-temperature resistant permanent antistatic active substance. Specially optimized for PS injection and foaming products, it offers excellent fluidity and dispersion ...
White Granules Antistatic Agent For Extrusion / Injection Molding / Blow Molding
Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If ...
Permanent Polymer Antistatic Agent ASTPEEN108 Plastic Pellets For Industrial Use Highly Effective
Permanent polymer antistatic agent ASTPEEN108 offers long-lasting performance with low resistance. White granules suitable for LDPE, HDPE, and PP processing. Features easy coloring capability and works with extrusion, injection molding, and blow molding applications.
General-purpose Anti-static Masterbatch PP Plastic Pellets – Permanently High-performance Supplied Directly From The Factory
Permanent anti-static PP masterbatch forms internal conductive network for durable static protection, independent of humidity. Simplifies production with direct mixing, no blooming, and stable 10⁶–10¹¹ Ohm resistance for injection, extrusion, and packaging applications.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
