"industrial grade antistatic agent"
Özel Kalıcı Antistatik Ajan Duyarlı Elektronikler İçin Granüler Endüstriyel Sınıf
Permanent Antistatic Agent For Polymers Astpeen 313 This product is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Recommended Dosage It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used. Instructions for Use Blend ASTPEEN permanent polymeric antistatic agent
Endüstriyel Kalıcı Antistatik Ajan Granüller Enjeksiyon Kalıplama Sınıfı Yaşlanmaya Karşı
Permanent Antistatic Agent for Polymers ASTPEEN 800 Features low surface resistance and easy colour matching. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Product Specifications Test Item Unit Test Method Test Value Tensile Strength at 25℃ MPa GB/T 528 7.3 Elongation at Break at 25℃ % GB/T 528 1322 Shore Hardness, 3s HD GB/T 2411 25 Density g/cm³ GB/T 533 1.241 Melt Flow Rate (200℃, 2.16kg) g/10min GB- 3682
Antifouling Elastomer Pelet Kalıcı Antistatik Ajan Polimer Endüstriyel Sınıf
Permanent Antistatic Agent for Polymers - ASTPEEN 301 White/pale yellow translucent elastomer pellets featuring low surface resistance and easy color matching. Surface resistance ≤ 10⁷ Ω, hardness 63D, melting point 190℃. Product Applications Recommended for heat-resistant products including PA, PC, PPO, PPS, PEEK and LCP. Can be directly blended for injection molding or extrusion; also suitable for film blowing of PP and HDPE (pelletizing required) and transparent ABS
Kalıcı statik kontrol polimer antistatik ajan endüstriyel için enjeksiyon derecesi
Permanent Antistatic Agent For Polymers ASTPEEN 8800 Series White elastomer pellets with surface resistance ≤ 10¹⁰ Ω, hardness 95A, and melting point ~180°C. Recommended for transparent materials including GPPS (8801), ABS (8802), PMMA (8805), PC/PET (8808), PP/PE (8818) and other transparent grades. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other applications. Recommended Dosage Direct addition to material at 10-25%
Gıda sınıfı Isı Direnci Polimer Ürünleri İçin Antistatik Ajan Parçacıklar
ASTPEEN 310 Permanent Antistatic Agent for Polymers Pale yellow translucent elastomer particles designed for effective static control in polymer applications. Features low surface resistance and easy color matching capabilities. Key Specifications Surface Resistance: ≤ 1*10⁶ Ω Hardness: 95A Melting Point: ~180℃ Appearance: Pale yellow translucent elastomer particles Technical Properties Test Item Unit Test Method Test Value Tensile Strength at 25℃ MPa GB/T 528 6.8 Elongation
