"tpe thermoplastic elastomer"
حبيبات TPE المطاط الصناعي الحراري 65A مادة نايلون للقولبة الخارجية تحكم في الكهرباء الساكنة
Thermoplastic Elastomer TPE 65A009 Nylon Overmolding Material Technical Specifications Test Item Test Method 65A009 Nylon Overmolding Material Tensile Strength at 25℃, MPa GB/T 528 2.8 Elongation at Break at 25℃, % GB/T 528 556 Shore Hardness, 3s, HA GB/T 2411 65 Density, g/cm³ GB/T 533 1.056 Melt Flow Rate, g/10min (190℃, 2.16kg) GB/T 3682 19.5 This series offers a wide range of grades from general-purpose to special-functional types to meet application requirements across
حبيبات TPE للتحكم في الكهرباء الساكنة، مادة اللدائن الحرارية المرنة لعمليات التشكيل الزائد، درجة صناعية
Thermoplastic Elastomer TPE 70A301 Overmolding Material Offering static control and enhanced functional elastomer performance for various industrial applications. Technical Specifications Test Item Test Method TPEHSZB70A301 Overmolding Material Tensile Strength at 25℃, MPa GB/T 528 11.7 Elongation at Break at 25℃, % GB/T 528 1005 Shore Hardness, 3s, HA GB/T 2411 70 Density, g/cm³ GB/T 533 1.179 Melt Flow Rate, g/10min (190℃, 2.16kg) GB/T 3682 1.49 Melt Flow Rate, g/10min (190
حبيبات مطاطية مرنة عالية من مادة TPE، شريط مانع تسرب صناعي 70A لصناعة السيارات
Thermoplastic Elastomer TPE 70A Seal Strip Material Offering static control and enhanced functional elastomer performance for demanding industrial applications. Technical Specifications Test Item Test Method 70A Seal Strip Material Tensile Strength at 25℃, MPa GB/T 528 6.9 Elongation at Break at 25℃, % GB/T 528 882 Shore Hardness, 3s, HA GB/T 2411 70 Density, g/cm³ GB/T 533 1.050 Melt Flow Rate, g/10min (220℃, 5kg) GB/T 3682 1.260 This series offers a wide range of grades
حبيبات TPU عالية المرونة، مادة خام مطاط البولي يوريثين الحراري 35D TPE
Thermoplastic Polyurethane Elastomer TPEE 35D Technical Specifications Test Items Test Method 35D Tensile Strength, 25℃, MPa GB/T 528 9.6 Elongation at Break, 25℃, % GB/T 528 450 Shore Hardness, 3s, HD GB/T 2411 35 Density, g/cm³ GB/T 533 1.138 Melt Flow Rate, g/10min (220℃, 2.16kg) GB-3682 21.04 Processing Requirements TPEE must be pre-dried prior to processing to ensure the resin remains dry during processing. When the temperature exceeds the melting point, moisture in the
حبيبات مادة البولي إيثيلين تيريفثاليت المرنة المقاومة للنفخ 40D-55D صلابة آمنة بيئيًا
Flexible TPEE Blow Molding Material (40D-55D) Our TPE blow molding material (40D-55D) is a high-performance elastomer developed specifically for blow molding processes. This material integrates the flexibility of rubber with the processability of engineering plastics, offering excellent melt strength, uniform wall thickness during molding, and stable performance characteristics. It is non-toxic, halogen-free, and widely used in automotive, electronic, and industrial
