86--13018050899
지금 문의
품질 Easy Color Matching Permanent Antistatic Agents In Electronic And Plastic Products 공장
<
품질 Easy Color Matching Permanent Antistatic Agents In Electronic And Plastic Products 공장
품질 Easy Color Matching Permanent Antistatic Agents In Electronic And Plastic Products 공장
>

Easy Color Matching Permanent Antistatic Agents In Electronic And Plastic Products

브랜드 이름: HAISO ASTPEEN
모델 번호: 100
원산지: 후베이, 중국
태그

정전기 방지제

영구 대전 방지제

영구 정전기 방지 첨가제

제품 세부정보

제품 색상: 백색 / 연노란색 적용범위: 폴리머용 대전방지제
성능 기능: 낮은 표면 저항 첨가제 처리 이점: 쉬운 컬러 매칭 정전기 방지
강조하다

Polymer Type Antistatic Agent

,

Antistatic Agents In Plastic Products

,

Permanent Antistatic Agents In Electronic

제품 설명

Permanent Antistatic Agent For Polymers - ASTPEEN 100
ASTPEEN 100 is a white/pale yellow elastic granule featuring low surface resistance and easy color matching. With surface resistance ≤ 10⁶ Ω, hardness ~80 A, melting range 130-150°C, and melt flow indices of 3-5 and 25-35 g/10 min (190°C, 2.16 kg), it is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.
Recommended Applicable Materials and Processes
  • Directly used in soft transparent materials such as TPU, PVC, TPE, POE, EVA, etc., for extrusion, injection moulding, blow moulding and foaming.
  • Used for extrusion (sheet), injection moulding, blow moulding (film) and foaming of PP, LLDPE, LDPE and HDPE.
Technical Specifications - Model: ASTPEEN 100
Test Item Unit Test Method Test Value
Tensile Strength at 25℃ MPa GB/T 528 7.3
Elongation at Break at 25℃ % GB/T 528 734
Shore Hardness, 3s HD GB/T 2411 25
Density g/cm³ GB/T 533 1.226
Melt Flow Rate (190℃, 2.16kg) g/10min GB-3682 42.9
Surface Resistance Ω GB/T 1410 5.8*10⁵
Recommended Dosage
It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.
Instructions for Use
Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing. Add dispersants, fillers, pigments, etc., to the mixture as required, then melt and compound using a twin-screw extruder to process into masterbatch. (If needed, we can provide special masterbatch, which can be directly used in production after uniform dry mixing with raw materials at a ratio of 1:1, 1:2 or 1:3.)
Any conventional processing methods can be applied, such as open mixing / internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
A suitable compatibiliser may be added as required (please consult us for specific products).
Before processing, pre-drying of the mixture is recommended as needed (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss during processing.
Precautions
  • Use up the product as soon as possible after opening.
  • Any unused product must be stored in a sealed container to prevent moisture absorption.
  • Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use.
  • Otherwise, moisture absorption from air may result in degraded performance during subsequent processing.
Packaging and Storage
Packaging: 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag.
Storage: Store in a cool, dry and ventilated warehouse, away from direct sunlight, heat sources and ignition sources.
Safety and Environmental Protection
All raw materials are polymeric compounds with an eco-friendly production process and no waste gas, waste water or industrial residue.
This product is non-toxic granular solid. General protective equipment (e.g. gloves, dust masks) is recommended during handling.
In case of accidental contact with eyes or skin, rinse immediately with plenty of water. Seek medical attention promptly if discomfort occurs.

제품 하이라이트

Permanent Antistatic Agent For Polymers - ASTPEEN 100 ASTPEEN 100 is a white/pale yellow elastic granule featuring low surface resistance and easy color matching. With surface resistance ≤ 10⁶ Ω, hardness ~80 A, melting range 130-150°C, and melt flow indices of 3-5 and 25-35 g/10 min (190°C, 2.16 kg...

문의 보내기
관련 제품
품질 25D Thermoplastic Polyurethane Elastomer Granule TPEE Plascic Raw Material 공장

25D Thermoplastic Polyurethane Elastomer Granule TPEE Plascic Raw Material

Thermoplastic Polyurethane Elastomer TPEE 25D Product Overview TPEE 25D offers high impact resistance, stable performance, and easy processing capabilities. This thermoplastic polyurethane elastomer requires proper pre-drying before processing to maintain optimal material properties. Technical Specifications Test Items Test Method 25D Tensile Strength, 25℃, MPa GB/T 528 5.5 Elongation at Break, 25℃, % GB/T 528 410 Shore Hardness, 3s, HD GB/T 2411 25 Density, g/cm³ GB/T 533 1

품질 Industrial Grade Thermoplastic Polyurethane TPU Elastomer Granule 72D Shore Hardness 공장

Industrial Grade Thermoplastic Polyurethane TPU Elastomer Granule 72D Shore Hardness

Thermoplastic Polyurethane Elastomer TPEE 72D Product Overview TPEE 72D offers high impact resistance, stable performance, and easy processing capabilities, making it ideal for demanding industrial applications. Technical Specifications Test Items Test Method 72D Tensile Strength, 25℃, MPa GB/T 528 38.5 Elongation at Break, 25℃, % GB/T 528 475 Shore Hardness, 3s, HD GB/T 2411 72 Density, g/cm³ GB/T 533 1.290 Processing Requirements Pre-drying is essential: TPEE must be pre

품질 50D Hardness Thermoplastic Polyurethane Elastomer Industrial Use Automotive Grade 공장

50D Hardness Thermoplastic Polyurethane Elastomer Industrial Use Automotive Grade

Thermoplastic Polyurethane Elastomer TPEE 50D TPEE 50D offers high impact resistance, stable performance, and easy processing capabilities. This thermoplastic polyurethane elastomer requires proper pre-drying before processing to ensure optimal performance. Technical Specifications Test Items TPEE 50D Shore Hardness, 3s, HD 51 Tensile Strength, 25℃, MPa 19.2 Elongation at Break, 25℃, % 587 Melt Flow Rate, g/10min (220℃, 2.16kg) 1.0/6.9 Density, g/cm³ 1.175 Processing

품질 Thixotropic Water Stop Paste Waterblocking Compound For Optical Cables 공장

Thixotropic Water Stop Paste Waterblocking Compound For Optical Cables

Waterblocking Compound For Optical Fiber Cable Water blocking grease for optical and electrical cables is a thixotropic paste-form chemical water-blocking material specially designed for optical cables, communication cables and power cables. It is compounded through an advanced process. Its core function is to expand rapidly upon contact with water when the outer sheath of a cable is damaged and water intrudes, forming a gel-like barrier that effectively prevents further

인용 을 요청 하십시오

아래의 온라인 문의 연락 양식을 사용하시기 바랍니다. 질문이 있으시면 저희 팀이 가능한 한 빨리 연락합니다.

최대 5개의 파일을 업로드할 수 있고 각 파일 크기는 최대 10M입니다.