Quality Easy Color Matching Permanent Antistatic Agents In Electronic And Plastic Products factory

Easy Color Matching Permanent Antistatic Agents In Electronic And Plastic Products

Brand Name: HAISO ASTPEEN

Model Number: 100

Place of Origin: Hubei,China

Industrial Grade Antistatic Agent

Halogen Free Anti Static Agents

Anti Aging Antistatic Agent Granules

Product Details

Product Color:

White/Pale Yellow

Application Scope:

Antistatic Agent For Polymers

Performance Feature:

Low Surface Resistivity Additive

Processing Advantage:

Easy Colour Matching Antistatic

Highlight

Polymer Type Antistatic Agent

Antistatic Agents In Plastic Products

Permanent Antistatic Agents In Electronic

Product Description

Permanent Antistatic Agent For Polymers - ASTPEEN 100

ASTPEEN 100 is a white/pale yellow elastic granule featuring low surface resistance and easy color matching. With surface resistance ≤ 10⁶ Ω, hardness ~80 A, melting range 130-150°C, and melt flow indices of 3-5 and 25-35 g/10 min (190°C, 2.16 kg), it is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.

Recommended Applicable Materials and Processes

Directly used in soft transparent materials such as TPU, PVC, TPE, POE, EVA, etc., for extrusion, injection moulding, blow moulding and foaming.
Used for extrusion (sheet), injection moulding, blow moulding (film) and foaming of PP, LLDPE, LDPE and HDPE.

Technical Specifications - Model: ASTPEEN 100

Test Item	Unit	Test Method	Test Value
Tensile Strength at 25℃	MPa	GB/T 528	7.3
Elongation at Break at 25℃	%	GB/T 528	734
Shore Hardness, 3s	HD	GB/T 2411	25
Density	g/cm³	GB/T 533	1.226
Melt Flow Rate (190℃, 2.16kg)	g/10min	GB-3682	42.9
Surface Resistance	Ω	GB/T 1410	5.8*10⁵

Recommended Dosage

It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.

Instructions for Use

Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing. Add dispersants, fillers, pigments, etc., to the mixture as required, then melt and compound using a twin-screw extruder to process into masterbatch. (If needed, we can provide special masterbatch, which can be directly used in production after uniform dry mixing with raw materials at a ratio of 1:1, 1:2 or 1:3.)

Any conventional processing methods can be applied, such as open mixing / internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.

A suitable compatibiliser may be added as required (please consult us for specific products).

Before processing, pre-drying of the mixture is recommended as needed (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss during processing.

Precautions

Use up the product as soon as possible after opening.
Any unused product must be stored in a sealed container to prevent moisture absorption.
Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use.
Otherwise, moisture absorption from air may result in degraded performance during subsequent processing.

Packaging and Storage

Packaging: 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag.

Storage: Store in a cool, dry and ventilated warehouse, away from direct sunlight, heat sources and ignition sources.

Safety and Environmental Protection

All raw materials are polymeric compounds with an eco-friendly production process and no waste gas, waste water or industrial residue.

This product is non-toxic granular solid. General protective equipment (e.g. gloves, dust masks) is recommended during handling.

In case of accidental contact with eyes or skin, rinse immediately with plenty of water. Seek medical attention promptly if discomfort occurs.

Product Highlights

Permanent Antistatic Agent For Polymers - ASTPEEN 100 ASTPEEN 100 is a white/pale yellow elastic granule featuring low surface resistance and easy color matching. With surface resistance ≤ 10⁶ Ω, hardness ~80 A, melting range 130-150°C, and melt flow indices of 3-5 and 25-35 g/10 min (190°C, 2.16 kg...

Send Inquiry

Long Lasting Permanent Antistatic Additives White Granules For Transparent ABS

ASTPEEN 8802# Permanent Antistatic Agent for Transparent ABS ASTPEEN 8802# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent ABS materials. This polyether ester amide (PEBA) based polymer antistatic agent is designed to solve static problems in ...

28-72D Hardness TPEE Antistatic Material Halogen Free Anti Static Additives For Plastic

Halogen-free TPEE antistatic material combines elasticity with stable static dissipation. Excellent tensile strength, elongation, and processability for safe, efficient production in sensitive applications.

Antifouling Antistatic Additives Cylindrical Particles For Transparent PP And PE

ASTPEEN 8818# Permanent Antistatic Agent for Transparent PP & PE ASTPEEN 8818# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent PP (including random copolymer polypropylene) and PE materials. As a polyether ester amide (PEBA) based polymer ...

White Granules Antistatic Agent For Extrusion / Injection Molding / Blow Molding

Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If ...

Request A Quote

Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.

Email*

Phone / WhatsApp

Name

Company Name

Inquiry Message*

Attach Files

Choose Files

You can upload up to 5 files and Each file sized 10M max.