"antistatic material"
Pelotas de Agente Antiestático Permanente ASTPEEN 813 para Moldagem por Injeção de Plástico
Permanent Antistatic Agent For Polymers Astpeen 813 This permanent antistatic agent features low surface resistance and easy color matching. It is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Recommended Dosage It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of
Agentes Antiestáticos Permanentes de Fácil Combinação de Cores em Produtos Eletrônicos e Plásticos
Permanent Antistatic Agent For Polymers - ASTPEEN 100 ASTPEEN 100 is a white/pale yellow elastic granule featuring low surface resistance and easy color matching. With surface resistance ≤ 10⁶ Ω, hardness ~80 A, melting range 130-150°C, and melt flow indices of 3-5 and 25-35 g/10 min (190°C, 2.16 kg), it is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Recommended Applicable Materials and Processes Directly
Agentes antistáticos permanentes em polímero de grau industrial
Permanent Antistatic Agent for Polymers - ASTPEEN 301 White/pale yellow translucent elastomer pellets featuring low surface resistance and easy color matching. Surface resistance ≤ 10⁷ Ω, hardness 63D, melting point 190℃. Product Applications Recommended for heat-resistant products including PA, PC, PPO, PPS, PEEK and LCP. Can be directly blended for injection molding or extrusion; also suitable for film blowing of PP and HDPE (pelletizing required) and transparent ABS
Grânulos Industriais Permanentes Antiestáticos para Moldagem por Injeção com Grau Antienvelhecimento
Permanent Antistatic Agent for Polymers ASTPEEN 800 Features low surface resistance and easy colour matching. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields. Product Specifications Test Item Unit Test Method Test Value Tensile Strength at 25℃ MPa GB/T 528 7.3 Elongation at Break at 25℃ % GB/T 528 1322 Shore Hardness, 3s HD GB/T 2411 25 Density g/cm³ GB/T 533 1.241 Melt Flow Rate (200℃, 2.16kg) g/10min GB- 3682
Controle estático permanente de polímero agente antistático de injecção para uso industrial
Permanent Antistatic Agent For Polymers ASTPEEN 8800 Series White elastomer pellets with surface resistance ≤ 10¹⁰ Ω, hardness 95A, and melting point ~180°C. Recommended for transparent materials including GPPS (8801), ABS (8802), PMMA (8805), PC/PET (8808), PP/PE (8818) and other transparent grades. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other applications. Recommended Dosage Direct addition to material at 10-25%
Agente Antistático Permanente Granula Elástica Para Polímeros Baixa Resistência de Superfície
Permanent Antistatic Agent For Polymers - ASTPEEN 100D ASTPEEN 100D is a white/pale yellow elastic granule featuring low surface resistance and easy color matching. With surface resistance ≤ 10⁶ Ω, hardness ~60 A, melting range 85°C. Recommended for rubber compounding (internal mixing or open mixing) and extrusion pelletizing of soft rubber materials such as EPDM, NBR, silicone rubber, EVA and TPE. This product widely used in plastic modification, industrial tools, electronic
Agente antistático de granulação branca para extrusão / moldagem por injecção / moldagem por sopro
Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If necessary, add an appropriate amount (3–5%) of compatibilizers such as EAA, EEA, POE and corresponding maleic anhydride grafted polymers. It is mandatory to perform pre-blending
Partículas de Agente Antiestático Resistente ao Calor de Grau Alimentício para Produtos Poliméricos
ASTPEEN 310 Permanent Antistatic Agent for Polymers Pale yellow translucent elastomer particles designed for effective static control in polymer applications. Features low surface resistance and easy color matching capabilities. Key Specifications Surface Resistance: ≤ 1*10⁶ Ω Hardness: 95A Melting Point: ~180℃ Appearance: Pale yellow translucent elastomer particles Technical Properties Test Item Unit Test Method Test Value Tensile Strength at 25℃ MPa GB/T 528 6.8 Elongation
Masterbatch antiestático permanente à base de PP para moldagem por injecção / extrusão de perfis
PP Based Permanent Antistatic Masterbatch Intrinsic conductive pellet specifically formulated for PP injection, extrusion, profile, sheet, and foaming applications. PP grade permanent antistatic masterbatch utilizes pure PP resin as carrier, blended with high-efficiency intrinsic permanent antistatic active components and compatible additives through high-temperature compounding, internal mixing, and twin-screw extrusion pelletizing. The product offers excellent dispersion
Masterbatch Antiestático Permanente ABS Pellets Condutivos para Moldagem por Injeção
ABS Permanent Antistatic Masterbatch ESD Conductive Pellet ABS antistatic masterbatch is specifically engineered for ABS engineering plastic products requiring strict anti-static and ESD protection. Utilizing ABS resin as the carrier, it incorporates high-performance intrinsic permanent conductive components and specialized compatibilizers to ensure perfect fusion with ABS base material, delivering excellent impact resistance and superior surface smoothness after molding.
Agentes anti-estáticos livres de halogênios Produtos químicos de longa duração 1,136 g/cm3 Para materiais poliméricos
Halogen-Free Antistatic Agent 301#A Product Overview Our Halogen-Free Antistatic Agent is a professionally developed environmental protection product that is completely halogen-free, non-toxic, and harmless. It complies with EU REACH, ROHS, and other international environmental standards, with no harmful precipitation and excellent compatibility with various polymer materials. Key Features Long-lasting antistatic performance Effectively eliminates static accumulation on
TPE Grânulos Elastomero termoplástico 65A Nylon Supermolding Material Controle estático
Thermoplastic Elastomer TPE 65A009 Nylon Overmolding Material Technical Specifications Test Item Test Method 65A009 Nylon Overmolding Material Tensile Strength at 25℃, MPa GB/T 528 2.8 Elongation at Break at 25℃, % GB/T 528 556 Shore Hardness, 3s, HA GB/T 2411 65 Density, g/cm³ GB/T 533 1.056 Melt Flow Rate, g/10min (190℃, 2.16kg) GB/T 3682 19.5 This series offers a wide range of grades from general-purpose to special-functional types to meet application requirements across
