Permanent Antistatic Agent ASTPEEN 108M for Polyethylene
Product Details
| Melting Temperature: | 150-165 ℃ | Processing Temperature: | 150-220 ℃ |
|---|---|---|---|
| Tensile Strength: | 7.2 MPa | Elongation At Break: | 505% |
| Surface Resistance: | 1.5×10⁶ Ω | ||
| Highlight |
ASTPEEN 108M antistatic agent,Permanent antistatic agent polyethylene,Antistatic agent for polyethylene |
||
Product Description
ASTPEEN 108M is a permanent polymeric antistatic agent independently developed for polyethylene materials (LLDPE, LDPE, HDPE). Different from conventional low‑molecular‑weight migratory antistatic additives, it delivers long‑lasting permanent antistatic performance rather than surface‑migration‑dependent temporary antistatic effect.
This product features moderate compatibility with polyolefin matrix, so it imposes minimal adverse influence on the original physical and mechanical properties of PE substrates. Its ideal melting temperature ranges from 150‑165 ℃ for full plasticization, favorable fluidity and good melt strength. The recommended molding processing temperature window is 150‑220 ℃. Thermal decomposition and discoloration may occur once processing temperature exceeds 240 ℃, which will cause deterioration of final product performance.
Application scenarios cover blown film, injection molding and extrusion processing of PE. For blown‑film process, the dosage shall be appropriately increased compared with injection‑molding application. The suggested typical addition dosage is around 20%. Sufficient drying of ASTPEEN 108M is required prior to compounding and processing. Store the product in cool, dry and well‑ventilated indoor environment at ambient temperature.
| Test Item | Unit | Test Method | Typical Value |
|---|---|---|---|
| Tensile Strength (25℃) | MPa | GB/T 528 | 7.2 |
| Elongation at Break (25℃) | % | GB/T 528 | 505 |
| Shore Hardness (3s) | HD | GB/T 2411 | 30 |
| Density | g/cm³ | GB/T 533 | 1.164 |
| Melt Flow Index (190℃,2.16kg) | g/10min | GB‑3682 | 9.6 |
| Surface Resistance Value | Ω | GB/T 1410 | 1.5×10⁶ |
Note: Solid line in dosage‑surface resistance curve stands for injection‑molded sheet test data; dashed line corresponds to blown‑film test data. When producing blown‑film articles, raise the addition concentration by 5% based on injection‑molding reference dosage.
Product Highlights
ASTPEEN 108M is a permanent polymeric antistatic agent independently developed for polyethylene materials (LLDPE, LDPE, HDPE). Different from conventional low‑molecular‑weight migratory antistatic additives, it delivers long‑lasting permanent antistatic performance rather than surface‑migration...
Permanent Antistatic Agent ASTPEEN 108M for Polyethylene
ASTPEEN 108M is a permanent polymeric antistatic agent independently developed for polyethylene materials (LLDPE, LDPE, HDPE). Different from conventional low‑molecular‑weight migratory antistatic additives, it delivers long‑lasting permanent antistatic performance rather than surface‑migration...
Impact Resistance Permanent Antistatic Additives For Transparent PMMA RoHS Compliant
ASTPEEN 8805# Permanent Antistatic Agent For Transparent PMMA ASTPEEN 8805# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent PMMA (Polymethyl Methacrylate), also known as acrylic. As a polyether ester am ide (PEBA) based polymer antistatic ...
Long Lasting Permanent Antistatic Additives White Granules For Transparent ABS
ASTPEEN 8802# Permanent Antistatic Agent for Transparent ABS ASTPEEN 8802# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent ABS materials. This polyether ester am ide (PEBA) based polymer antistatic agent is designed to solve static problems in ...
Antifouling Antistatic Additives Cylindrical Particles For Transparent PP And PE
ASTPEEN 8818# Permanent Antistatic Agent for Transparent PP & PE ASTPEEN 8818# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent PP (including random copolymer polypropylene) and PE materials. As a polyether ester am ide (PEBA) based polymer ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
