Selection Guide for ASTPEEN Series Polymer Permanent Antistatic Agents & Applicable Substrates
2026/04/24
The ASTPEEN series of polymer permanent antistatic agents are professionally synthesized and produced by our company, belonging to the polyether ester amide permanent antistatic category. This product dissipates static charges by forming a unique micro conductive network structure in the polymer matrix, delivering efficient and long-lasting antistatic performance.
Different from conventional antistatic agents, its antistatic property does not rely on surface migration, and is barely affected by ambient temperature and humidity. It features durable performance, resistance to wiping and washing, and negligible impact on the transparency and mechanical properties of finished products.
With the addition of ASTPEEN polymer permanent antistatic agent, the surface resistivity can reach 10⁶–10¹² Ω to meet standard antistatic requirements. Special grades can achieve resistivity below 10⁵ Ω to form conductive polymer materials.
-
Permanent & High-efficiency
Antistatic performance will not decline over time, nor be weakened by surface wiping or solvent cleaning, maintaining stable effectiveness throughout the product service life.
-
Toughening Modification
It can be used independently as an elastomer to improve the impact resistance and toughness of matrix materials.
-
Stable Performance
Adaptable to rigorous processing temperatures and various molding methods, hardly affected by external environments such as temperature, humidity and abrasion.
-
Minimal Impact on Mechanical Properties
It has little influence on the mechanical strength, heat resistance and processing fluidity of base resins.
-
Excellent Compatibility
Good compatibility with polymers. Various grades are applicable to most polymer materials, with low precipitation tendency and no adverse effect on subsequent printing, spraying and bonding processes.
-
Easy Color Matching
Fully adaptable to color mixing and customized color formulation demands.
-
Superior Transparency
It barely impairs the transparency of base resins after addition, making it ideal for applications with high transparency requirements.
| Model | Surface Resistivity | Hardness (±3A/D) | Melting Point (±10℃) | Recommended Applicable Materials & Processes |
|---|---|---|---|---|
| ASTPEEN 100 | ≤10⁶ Ω | 28D | 130/150℃ |
1.Directly used for soft transparent materials such as TPU, PVC, TPE, POE and EVA; applicable to extrusion, injection molding, blow molding, foaming and casting film processes. 2. Used for extrusion (sheet), injection molding, blow molding (film) and foaming of PP, LLDPE, LDPE and HDPE. |
| ASTPEEN 108 | ≤10⁶ Ω | 30D | 170/180℃ |
Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. |
| ASTPEEN 200 | ≤10⁶ Ω | 40D | 185℃ |
Recommended for extrusion and injection molding of PBT, TPEE, TPU, ABS and other materials. |
| ASTPEEN 300 | ≤10⁶ Ω | 30D | 190℃ |
Recommended for film blowing of PA & its elastomers, PP and PE, as well as transparent PMMA materials. |
| ASTPEEN 301 | ≤10⁷ Ω | 63D | 215℃ |
Recommended for injection molding and film blowing of PA, ABS, PP, HDPE, PC, PET, PPO, PPS, PEEK, high-temperature nylon, etc.; also applicable to transparent ABS products. |
| ASTPEEN 310 | ≤10⁶ Ω | 40D | 180℃ |
Recommended for thermally unstable products such as POM, and injection molding of PA, ABS, PC and ASA. |
| ASTPEEN 600 | ≤10⁶ Ω | 45D | 200℃ |
Recommended for injection molding and extruded sheet production of HIPS, ABS, TPEE, PC, PP, PBT, PET and other materials. |
| ASTPEEN 800 | ≤10⁶ Ω | 25D | 150/170℃ |
Recommended for transparent materials including transparent TPU, PVC, TPE, ABS, POE, SBS, ASA and PP. |
| ASTPEEN 806 | ≤10⁶ Ω | 50D | 200℃ |
Recommended for materials with high processing temperature and surface hardness requirements, such as PC, ABS, PBT, PET and TPEE; applicable to extrusion (board & sheet), injection molding, moulding and other processes. |
| ASTPEEN 8800 Series | 10⁹~10¹¹ Ω | 75D | 180℃ |
Recommended for transparent resins: GPPS(8801), ABS(8802), PMMA(8805), PC/PET(8808), PP/PE(8818), etc. |
| ASTPEEN 900 Series | 10⁶~10¹¹ Ω | Soluble in water and other polar solvents | -35℃ |
1.Recommended for coating, pouring and moulding processes of latex, liquid silica gel, liquid polyurethane, epoxy resin, paint and other products. 2. Resistant to water, alcohol and solvent wiping with strong adhesion, suitable for various surface coating applications. |
| Raw Material | Antistatic Agent Grade (Priority Order) | Dosage (Surface Resistivity: 10⁶–10⁹ Ω) |
Notes | Remarks |
|---|---|---|---|---|
| PS | 600#, 316#A | 15-30% | Pelletizing required (with approx. 3% compatibilizer); applicable for sheet extrusion | 316#A is halogen-free |
| ABS | 200#, 300#, 600# | 15-30% | Direct blending for injection molding and sheet extrusion | 300# for transparent grade |
| TPE | 100#, 600# | 15-30% | 100# for low hardness; 600# for high hardness; suitable for blending & injection molding | 100# available in transparent |
| TPU | 100#, 600# | 15-30% | 100# transparent grade; direct blending for injection molding | 600# for natural color |
| TPEE | 100#, 200#, 600# | 15-30% | 100# for low hardness materials | 600# for extrusion grade |
| Rubber | 100DRD# | 15-30% | Dispersion via internal mixing | — |
| EVA | 100# | 15-30% | Direct blending for injection molding | — |
| PC / PC/ABS Alloy | 301#, 806#, 8808# | 15-30% | Add hydrolysis inhibitor and transesterification inhibitor; dry materials to control moisture within 0.05% | 8808# for transparent grade |
| PET | 600#, 806#, 8806# | 15-30% | Add hydrolysis inhibitor and transesterification inhibitor; dry materials to control moisture within 0.05% | 8806# for transparent grade |
| PA | 300#, 301#, 308# | 15-30% | Direct blending for injection molding and fiber spinning | 301# for extrusion and spinning |
| PBT | 200#, 600# | 15-30% | Direct blending for injection molding and fiber spinning | 600# for extrusion grade |
| PP | 100#, 600#, 813# | 15-30% | Pelletizing required (with approx. 3% compatibilizer); for sheet extrusion, injection-molded plates & frames | 600# for extrusion grade |
| LLDPE | 100# | 15-30% | Suitable for film blowing | — |
| LDPE / HDPE | 100#, 300#, 301#, 600# | 15-30% | Pelletizing required (with approx. 3% compatibilizer) | 600# for extrusion grade |
| PPO / PEEK / LCP | 301#, 310# | 15-30% | Pelletizing required; strictly control processing temperature | Control processing temperature |
| POM | 310# | 15-30% | Pelletizing required | For sheets, rods and injection molding |
| PMMA | 300#, 8805# | 15-30% | Pelletizing available; direct blending for injection molding | Transparent grade |
