Translucent Elastomer Particles Permanent Anti Static Agent For Electronics Industry
Productdetails
| procesmethode: | Intern polymeeradditief | Performance -functie: | Hoog rendement statisch dissipatief |
|---|---|---|---|
| Fysieke eigendom: | Kleurbare antistatische masterbatch | Productnaam: | Permanent antistatisch middel |
| Type: | antistatisch middel | ||
| Markeren |
Permanent Polymer Antistatic Agent,Anti Static Agent Elastomer Particles,Anti Static Agent For Electronics Industry |
||
Productbeschrijving
| Test Item | Unit | Test Method | Test Value |
|---|---|---|---|
| Tensile Strength at 25℃ | MPa | GB/T 528 | 8.0 |
| Elongation at Break at 25℃ | % | GB/T 528 | 1079 |
| Shore Hardness, 3s | HD | GB/T 2411 | 25 |
| Density | g/cm³ | GB/T 533 | 1.065 |
| Melt Flow Rate (190℃, 2.16kg) | g/10min | GB- 3682 | 26.4 |
| Surface Resistance | Ω | GB/T 1410 | 1.1*10⁷ |
- Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing.
- Add dispersants, fillers, pigments, etc., to the mixture as required, then melt and compound using a twin-screw extruder to process into masterbatch.
- Any conventional processing methods can be applied, such as open mixing / internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
- A suitable compatibiliser may be added as required (please consult us for specific products).
- Before processing, pre-drying of the mixture is recommended as needed (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss during processing.
- Use up the product as soon as possible after opening.
- Any unused product must be stored in a sealed container to prevent moisture absorption.
- Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use.
- Otherwise, moisture absorption from air may result in degraded performance during subsequent processing.
Producthoogtepunten
Permanent Antistatic Agent for Polymers ASTPEEN 300 White/light yellow translucent elastomer particles featuring low surface resistance and easy color matching. Product Specifications Surface resistance ≤ 1*10⁶ Ω, hardness 80A, melting point 170℃. Recommended Applications Recommended for film ...
25D Thermoplastic Polyurethane Elastomer Granule TPEE Plascic Raw Material
Thermoplastic Polyurethane Elastomer TPEE 25D Product Overview TPEE 25D offers high impact resistance, stable performance, and easy processing capabilities. This thermoplastic polyurethane elastomer requires proper pre-drying before processing to maintain optimal material properties. Technical Specifications Test Items Test Method 25D Tensile Strength, 25℃, MPa GB/T 528 5.5 Elongation at Break, 25℃, % GB/T 528 410 Shore Hardness, 3s, HD GB/T 2411 25 Density, g/cm³ GB/T 533 1
Industrial Grade Thermoplastic Polyurethane TPU Elastomer Granule 72D Shore Hardness
Thermoplastic Polyurethane Elastomer TPEE 72D Product Overview TPEE 72D offers high impact resistance, stable performance, and easy processing capabilities, making it ideal for demanding industrial applications. Technical Specifications Test Items Test Method 72D Tensile Strength, 25℃, MPa GB/T 528 38.5 Elongation at Break, 25℃, % GB/T 528 475 Shore Hardness, 3s, HD GB/T 2411 72 Density, g/cm³ GB/T 533 1.290 Processing Requirements Pre-drying is essential: TPEE must be pre
50D Hardness Thermoplastic Polyurethane Elastomer Industrial Use Automotive Grade
Thermoplastic Polyurethane Elastomer TPEE 50D TPEE 50D offers high impact resistance, stable performance, and easy processing capabilities. This thermoplastic polyurethane elastomer requires proper pre-drying before processing to ensure optimal performance. Technical Specifications Test Items TPEE 50D Shore Hardness, 3s, HD 51 Tensile Strength, 25℃, MPa 19.2 Elongation at Break, 25℃, % 587 Melt Flow Rate, g/10min (220℃, 2.16kg) 1.0/6.9 Density, g/cm³ 1.175 Processing
Thixotropic Water Stop Paste Waterblocking Compound For Optical Cables
Waterblocking Compound For Optical Fiber Cable Water blocking grease for optical and electrical cables is a thixotropic paste-form chemical water-blocking material specially designed for optical cables, communication cables and power cables. It is compounded through an advanced process. Its core function is to expand rapidly upon contact with water when the outer sheath of a cable is damaged and water intrudes, forming a gel-like barrier that effectively prevents further
Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.
