Continuous Optimization of Antistatic Agents for Polymer Static‑Control Challenges
2026/08/24
Aiming at common static‑electricity issues within the plastics and polymer industry, our company keeps optimizing our permanent antistatic agent series.
Antistatic performance requirements vary greatly with different substrates, processing technologies and end‑use environments. Based on real‑world feedback from customer sampling tests, we adjust formulas to improve substrate compatibility, heat resistance and long‑term antistatic performance.
We value every test result throughout sample trial, performance evaluation and mass production. For on‑site working conditions of customers, we provide supporting technical references to help clients select antistatic solutions matching their production lines.
| Raw materials | Antistatic agent type (listed in order of priority) |
Dosage (E6-9Ω) |
Precautions | Remarks |
|---|---|---|---|---|
|
PS |
600#,316#A |
15-30% |
Pelletisation is required (with the addition of approximately 3% compatibiliser); can be extruded into sheet form |
316#A is suitable for halogen-free applications |
|
ABS |
200#,300#,600# |
15-30% |
Suitable for compounding and injection moulding; suitable for extrusion into sheet |
300# is suitable for transparent applications |
|
TPE |
100#,600# |
15-30% |
100# is suitable for low hardness,600# is suitable for high hardness; suitable for compounding and injection moulding |
100# can be used for transparent applications |
|
TPU |
100#,600# |
15-30% |
100# can be made transparent; suitable for compounding and injection moulding |
600# is suitable for natural colour applications |
|
Rubber |
#100DRD |
15-30% |
Internal Mixing and Dispersion |
|
|
EVA |
100# |
15-30% |
Compound injection moulding |
|
|
PC,PC/ABS |
301#, 806#,8808# |
15-30% |
Add hydrolysis inhibitors and ester exchange inhibitors; the material must be dried to ensure the moisture content is kept below 0.05 per mille. |
8808# Suitable for transparent materials |
|
PET |
600#,806#,8806# |
15-30% |
Add hydrolysis inhibitors and ester exchange inhibitors; the material must be dried to ensure the moisture content is kept below 0.05 per mille. |
8806# Suitable for transparent materials |
|
PA |
300#,301#,308# |
15-30% |
Suitable for injection moulding with additives; suitable for filament extrusion |
301# Suitable for extrusion and filament drawing |
|
PBT |
200#,600# |
15-30% |
Suitable for injection moulding with additives; suitable for filament extrusion |
600# Suitable for extrusion |
|
PP |
100#,600#,813# |
15-30% |
Pelletisation is required (with the addition of approximately 3% compatibiliser); can be extruded into sheets or injection-moulded into panels, frames, etc. |
600# is suitable for extrusion grade |
|
LLDPE |
100# |
15-30% |
Film blowing |
|
|
LDPE,HDPE |
100#,300#,301#,600# |
15-30% |
Extrusion is required (with the addition of approximately 3% compatibiliser) |
600# is suitable for extrusion grade |
|
PPO,PEEK,LCP |
301#,310# |
15-30% |
Extrusion |
Take care to control the processing temperature |
|
POM |
310# |
15-30% |
Extrusion |
Sheets, rods, injection-moulded parts |
|
PMMA |
300#,8805# |
15-30% |
Extruded pellets, suitable for blending and injection moulding |
Transparent |
Moving forward, we will further focus on antistatic additives. Product iteration will be driven by real market demands, to deliver practical and reliable material solutions for domestic manufacturers.
