Anti Moisture Permanent Anti Static Agent 1.207g/Cm3 For Electronic Components
Product Details
| Application Scope: | Antistatic Agent For Polymers | Performance Feature: | Low Resistance Static Dissipative |
|---|---|---|---|
| Processing Advantage: | Easy Color Matching Additive | ||
| Highlight |
Anti Moisture Permanent Anti Static Agent,Anti Static Agent for Electronic Components |
||
Product Description
ASTPEEN 806 features low surface resistance and easy color matching. This white/pale yellow elastomer particle product offers surface resistance ≤10⁶ Ω, hardness 50D, and melting point ~200℃.
- Recommended for PC, ABS, PBT, PET, TPEE and other materials with high processing temperature and surface hardness requirements
- Suitable for extrusion (sheets, plates), injection molding, molding and other processes (pelletizing required)
- Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields
- Product Model: Type ASTPEEN 806
| Test Item | Unit | Test Method | Test Value |
|---|---|---|---|
| Tensile Strength (25℃) | MPa | GB/T 528 | 8.0 |
| Elongation at Break (25℃) | % | GB/T 528 | 415 |
| Shore Hardness (3s) | HD | GB/T 2411 | 31 |
| Density | g/cm³ | GB/T 533 | 1.207 |
| Melt Flow Rate (220℃, 2.16kg) | g/10min | GB/T 3682 | 0.24 |
| Melt Flow Rate (220℃, 5kg) | g/10min | GB/T 3682 | 1.78 |
| Surface Resistance | Ω | GB/T 1410 | 1.2×10⁶ |
It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.
- Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing
- Add dispersants, fillers, pigments, etc., to the mixture as required
- Melt and compound using a twin-screw extruder to process into masterbatch
- Special masterbatch available (can be directly used in production after uniform dry mixing with raw materials at ratio of 1:1, 1:2 or 1:3)
- Any conventional processing methods can be applied: open mixing/internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
- A suitable compatibiliser may be added as required (please consult us for specific products)
- Before processing, pre-drying of the mixture is recommended (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss
- Use up the product as soon as possible after opening
- Any unused product must be stored in a sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use
- Otherwise, moisture absorption from air may result in degraded performance during subsequent processing
- Packaging: 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag
- Storage: Store in a cool, dry and ventilated warehouse, away from direct sunlight, heat sources and ignition sources
- All raw materials are polymeric compounds with an eco-friendly production process and no waste gas, waste water or industrial residue
- This product is non-toxic granular solid
- General protective equipment (e.g. gloves, dust masks) is recommended during handling
- In case of accidental contact with eyes or skin, rinse immediately with plenty of water
- Seek medical attention promptly if discomfort occurs
Product Highlights
Permanent Antistatic Agent for Polymers ASTPEEN 806 ASTPEEN 806 features low surface resistance and easy color matching. This white/pale yellow elastomer particle product offers surface resistance ≤10⁶ Ω, hardness 50D, and melting point ~200℃. Product Overview Recommended for PC, ABS, PBT, PET, TPEE ...
Long Lasting Permanent Antistatic Additives White Granules For Transparent ABS
ASTPEEN 8802# Permanent Antistatic Agent for Transparent ABS ASTPEEN 8802# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent ABS materials. This polyether ester amide (PEBA) based polymer antistatic agent is designed to solve static problems in ...
28-72D Hardness TPEE Antistatic Material Halogen Free Anti Static Additives For Plastic
Halogen-free TPEE antistatic material combines elasticity with stable static dissipation. Excellent tensile strength, elongation, and processability for safe, efficient production in sensitive applications.
Antifouling Antistatic Additives Cylindrical Particles For Transparent PP And PE
ASTPEEN 8818# Permanent Antistatic Agent for Transparent PP & PE ASTPEEN 8818# is a high-performance permanent antistatic agent specially developed by Haiso Technology for transparent PP (including random copolymer polypropylene) and PE materials. As a polyether ester amide (PEBA) based polymer ...
White Granules Antistatic Agent For Extrusion / Injection Molding / Blow Molding
Permanent Antistatic Agent For Polymers - ASTPEEN 108 ASTPEEN 108 is a white granules; surface resistance ≤ 10⁶ Ω; hardness ~90A; melting range 170~180°C; melt flow rate: 3–5 / 20–25 (190°C, 2.16 kg). Suitable for extrusion, injection molding, blow molding (film) and foaming of LDPE, HDPE and PP. If ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
